This is the Futaba CGY750 3-Axis Gyro.
FEATURES: Dynamic gyro response range of +/- 1200 degrees per second Supports all swashplate types and three types of servos 3D and F3C operation mode selectable Large, easy to read 128 x 36 dot graphical OLED (Organic Light Emitting Display) Basic and Expert menus for easy setup Only S.Bus compatible with one wire connection to the Futaba R6108SB and R6208SB receivers Firmware can be updated from PC through the CIU-2 PC Interface (not included), order FUTM0951 Advanced/adaptive PID control algorithm One year limited warranty through Hobby Services beginning at date of purchase
INCLUDES: Futaba CGY750 3-Axis Gyro with Controller, Revolution Sensor, Instruction Manual and Connectors
REQUIRES: Installing in helicopter and connecting to receiver
COMMENTS: The SBE-1 adapter (FUTM4194) is available for systems from other manufacturers or Futaba systems that cannot use an S-bus receiver.
SPECS: Operating Voltage: 3.8-8.4V DC Current Drain: 70mA Selectable Servo Frame: 70Hz, 280Hz & 560Hz Rate (rudder gyro only) Center Pulse Width: 1520us (70Hz & 280Hz) 760us (560Hz) Presets: 3D, Sports, 450-550, 600-700 and 750+ Governor Resolution: 0.1Hz (6rpm) engine RPM RPM Accuracy: 1% Head Speed Range: 700-4000 RPM Operating Temperature: 14°- +113°F (-10- +45°C) Control System: Digital advanced control Sensor: Micro Electromechanical Systems (MEMS) Gyro Hall effect sensor Angular Velocity Range: +-1,200° per second (gyro) Width, Controller: 1.14" (29mm) Gyro Sensor: 0.83" (21mm) Revo Sensor: 0.30" (7.5mm) Length, Controller: 1.73" (44mm) Gyro Sensor: 0.83" (21mm) Revo Sensor: 0.63" (16mm) Height Controller: 0.47" (12mm) Gyro Sensor: 0.33" (8.5mm) Revo Sensor: 0.39" (10mm) Weight: Controller: 0.459oz (13g) Gyro Sensor: 0.282oz (8g) Revo Sensor: 0.141oz (4g)