Shopping Cart

0 Items

Multiplex ParkMaster 3D ARF 39"

SKU: M214231


Product Description


This is the radio controlled, electric powered,
Multiplex ParkMaster 3D Park Flyer Airplane Kit.
For Intermediate Modelers.
Fully 3D capable, can be flown outdoors in moderate wind.
Construction: Elapor foam white in color
Wings: One-piece all foam
Radio Compartment: Accessible under wing
Aileron Control: Dual servo
Landing Gear: Main, prebent fixed wire 0.008" (2mm) diameter,
Wheels: Two foam 2" (51mm)
Canopy: Elapor foam
Decals: Peel and stick application with yellow, blue and green
Building Time: Ready to fly in several hours
Pre-molded wings, fuselage and tail assemblies, pushrods, all
hardware, pre-bent 0.008" (2mm) wire landing gear, two 2" (51mm)
main wheels, plastic motor mount, decal sheet and photo-illustrated
Motor: Multiplex makes a power set for this kit that includes a
Himax 2816-0890 Motor, BL-17 Speed Control, APC 11 x 5.5" taper
collet and prop driver (MPUG3231)
Battery: Multiplex #15 7116 (not carried)
Battery Charger: LiPo compatible
Radio: 4 channel
Servos: Four micro, 2-Aileron, 1-Elevator, 1-Rudder OR order MPUL9231
Flight Pack which includes servos, receiver and extensions in one
Misc. Items: Building and field equipment
Wingspan: 37.8" (960mm)
Wing Area: 565 sq in (36.5 sq dm)
Weight: 18.5oz (525g)
Wing Loading: 5.9 oz/sq ft) (18 g/sq dm)
Length: 39.4" (1000mm)
Airfoil: Fully symmetrical, mid-wing placement
Center of Gravity: 4.3 - 4.7" (110 - 120mm) Back from the wing's
leading edge at the fuselage
Control Throws-
Ailerons: 2.5" (65mm)
Elevator: 2.5" (65mm)
Rudder: 3.5" (90mm)
This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium CA glue used with
an activator is the only method of gluing recommended by the

Customer Reviews

There are no customer reviews for this product. However, you can be the first person to add a review for this product.