This is the Futaba 6J 6-Channel 2.4GHz S-FHSS and FHSS Selectable Mode Radio System. This version does not include servos.
FEATURES: Selectable S-FHSS and FHSS modes, the included R2006GS receiver automatically adapts to the selected mode Capable of 4 channels only in FHSS mode Fail safe on all channels in S-FHSS mode only (throttle channel only when FHSS mode is selected) 15 model memory with 4 character model naming 40x40 127 segment LCD display Modes 1-4 selectable by pilot R2006GS high-voltage (4.8 - 7.4V) 6-channel receiver with Easy-Link circuitry, frequency hopping, spread spectrum design and Dual Antenna Diversity Endpoint adjustment (EPA), sub trims, servo reversing & throttle cut Throttle position, mix and low battery warnings Trainer system (trainer cord not included) One year limited warranty through Hobby Services beginning at date of purchase Airplane Features; Two programmable mixes and two 5-point throttle curves Two 5-point pitch curves Flaperon with differential rate Flap trim (2 rates) V-tail mixing Elevon mixing Helicopter Features; Two 5-point throttle curves Three 5-point pitch curves Throttle hold Hover pitch Gyro and revo mixing Four swash plate types (H1, H3, HR3 & H3 w/AFR) Swash AFR (ail/ele/pitch) Throttle mix Electronic swash ring Throttle and pitch delay
INCLUDES: Futaba 6J 6-Channel Transmitter, R2006GS Receiver, Instruction Manual, Neckstrap and Smooth Ratchet Plate for Heli Throttle **** There is an optional NiMH battery which can be used, FUTM1473. To use this, you will need to purchase a new battery door and charge lead from Futaba Services, see comments.
REQUIRES: AA Cells: Four for transmitter Servos of modeler's choice Receiver battery
SPECS: Transmitter; Type: 2-stick, 6-channel, FHSS/S-FHSS selectable Frame Rate: 6.8ms Current Drain: 170mA Receiver; Modes: FHSS or S-FHSS (auto selectable) Power Requirements: 4.8V-7.4V Compatible Batteries: NiCd, NiMH, LiPo, LiIon & LiFe Dimensions: 1-11/16 x 15/16 x 5/16" (43 x 24 x 7.9mm) Weight: 0.29oz (8.3g) Current Drain: 80mA (@ no signal)
COMMENTS: To use the NiMH battery FUTM1473, you will need to purchase charger FUTM1832. Then call Futaba Services at 217-398-8970 option 2 and they will send you a battery door- HSP82469. If you already have a charger and need a charge lead they can sell you part number- HSP29615. (requires soldering on the correct charger plugs)