This is the ElectriFly AC/DC TritonEQ Charger, Discharger and Cycler with Built-In Equalizer.
**Primary differences between the TritonEQ and the Triton2 EQ are as follows;**
TritonEQ Triton2 EQ
Handles 1-14 NiCd & NiMH cells 1-24 NiCd & NiMH cells
1-6 LiPo/LiIon 1-6 LiPo/LiIon
1-6 (2-12V)Pb 3-12 (6-24V)Pb
Fast Charge Current: 0.1-5.0A 0.1-8.0A Linear
63W max DC, 50W max AC 120W max DC, 100W max AC
Battery Memories: 1 Battery Memories: 10
Cycle Count (NiCd, NiMH only): 1-5 cycles 1-10 cycles
No thermal probe port Thermal probe port
***Upgraded features over the ElectriFly Triton Jr. include;***
Lightweight built-in switching AC power supply, plus DC input capabilities
New reversed character LCD with backlight and 0-45° adjustable view angle
Built-in balancing for 1-6S LiPo, Li-Ion or LiFe (A123) cells
with FlightPower and ElectriFly adapters
FEATURES: Charges 1-14 cell NiMH and NiCd cells and 1-6 cell LiPo, Li-Ion and
LiFe (3.6, 3.7 or 3.3V cells)
Peak detection technology for NiCd and NiMH batteries, and constant
current/constant voltage technology for lithiums and lead-acid
batteries
Ideal for radio batteries and with charge currents adjustable from
100mA to 5 amps (limited to 1C for lithiums) it can also handle
large power packs
Built-in balancing for up to 6S LiPo, Li-Ion or LiFe (A123) cells
with FlightPower and ElectriFly adapters (GPMM3200 and GPMM3201)
Discharge cutoff voltage can be adjusted for NiCd/MH, and is fixed
for lithiums and lead-acid batteries
NiCd and NiMH trickle current is automatically set at 1/20th of
the fast charge current setting
Reversed LCD with backlight plus a 0-45° adjustable view angle
clearly displays input and output volts, peak volts, individual
lithium cell voltages, average discharge volts, charge and
discharge capacity, currents and time, error messages and more
Touchpad controls and super-simple programming make for
simplicity and reliability
Safety features include fast charge safety timer, current overload
and reverse polarity protection
One year limited warranty
INCLUDES: ElectriFly AC/DC TritonEQ with FlightPower and ElectriFly adapters,
AC power cord, DC power cord with alligator clips and
instruction manual
REQUIRES: Matching connector for discharge lead depending on battery
HCAP0101 Futaba J Tx/Rx Charge Leads NO 9VAP
HCAP0102 Futaba J Tx/Rx Charge Leads 9VAP ONLY
HCAP0105 JR Tx/Rx Charge Leads
HCAP0106 Hitec/Airtronics Z Tx/Rx Charge Leads
GPMM3148 Charge Lead BANANA/DEANS MALE U
GPMM3149 Charge Lead BANANA/DEANS MICRO
DTXC2222 Charge Lead Banana Plugs To Traxxas Male
**A more complete list of connectors can be found in the Accessory
Completion Guide**
SPECS: AC Input Voltage: 110V 60Hz - 240V 50Hz (detachable AC cord)
DC Input: 11-15.0V DC, with large alligator clips
Number of Outputs: One, banana jacks
Battery Types, # cells: 1-14 NiCd, NiMH
1-6 LiPo, Li-Ion, or LiFe (3.6, 3.7 or 3.3V cells)
2, 4, 6, 8, 10, 12V Pb (2V per cell)
Fast Charge Current: 0.1-5.0A (1C maximum for lithiums)
63W max DC, 50W max AC
Fast Charge Termination: Peak detection NiCd, NiMH, cc/cv for Pb and
lithiums
Trickle Current (NiCd/MH only): Chg current / 20
Peak Sensitivity (NiCd/MH only): 8mV NiCd, 5mV NiMH
Peak Delay at Start (NiCd/MH only): 3 minutes
Fast Charge Safety Timer: NiCd/MH 1.5 hours, lithiums 3 hours, or
turn off
Lithium Balancing Accuracy: 5mV per cell
Lithium Balancing Connector: FlightPower and ElectriFly adapters
included
Lithium Max. Node Current: 300mA
Discharge Current: 0.1-1.0A (5W max)
Discharge Cutoff Voltage: NiCd, NiMH0.1-16.8V
LiPo, Li-Ion 3.0V per cell
LiFe 2.5V per cell
Pb 1.8V per cell
Cycle Count (NiCd, NiMHonly): 1-5 cycles
Battery Memories: One
Programming Controls: Membrane touchpad, 4 buttons
Display Type: 2x16 reversed LCD w/backlight and adjustable angle
Audible Indicators: Beeper
Case Material: Aluminum and ABS plastic
Safety Devices: Solid-state reverse polarity and overload
Case Size: 5.9 x 6.0 x 2.3 in (150 x 153 x 58mm)
Weight: 23.8oz (675g, w/o AC power cord)
